Karagezgin
Council
Vauban by Volute Modz
The Vauban is a Ø22mm single-coil dripper, BF compatible, designed to be simple to assemble and to be very versatile.
- Spec:
- Dripper Ø22mm
- 3 finishes available: polished, polished black, satin
- Interchangeable air ducts (6 mono / dual airflow configurations) and fine adjustment
- integrated driptop compatible DT 510
- Engraving and Serialization
- Contains:
1 x Vauban atomizer
1 x classic 510 stud
1 x 510 BF pad (Bottom Feeder)
2 x Ultem inserts (open draw): 2.90 mm x 3.90 mm
2 x Ultem inserts (limited / open draw): 1.80 mm x 3.90 mm
2 x Ultem inserts (tight draw): 2 x Ø1.3mm
1 x insert ulterior full (for tight draw)
10 x transparent joints for Ultem inserts
1 x spare parts kit
Assembly notes:
To change the pad 510, unscrew the pad of the atomizer clockwise, and screw the new pad counter-clockwise.
For the installation of the inserts in ultem, place beforehand a small transparent joint (provided) around the base of the insert (this seal ensures a good maintenance in position and a sealing for the flow of air). The ultem inserts are designed to fit snugly in their cavity, they must not protrude outside or inside the chamber.
Fiyat:120 Euro
The Vauban is a Ø22mm single-coil dripper, BF compatible, designed to be simple to assemble and to be very versatile.
- Spec:
- Dripper Ø22mm
- 3 finishes available: polished, polished black, satin
- Interchangeable air ducts (6 mono / dual airflow configurations) and fine adjustment
- integrated driptop compatible DT 510
- Engraving and Serialization
- Contains:
1 x Vauban atomizer
1 x classic 510 stud
1 x 510 BF pad (Bottom Feeder)
2 x Ultem inserts (open draw): 2.90 mm x 3.90 mm
2 x Ultem inserts (limited / open draw): 1.80 mm x 3.90 mm
2 x Ultem inserts (tight draw): 2 x Ø1.3mm
1 x insert ulterior full (for tight draw)
10 x transparent joints for Ultem inserts
1 x spare parts kit
Assembly notes:
To change the pad 510, unscrew the pad of the atomizer clockwise, and screw the new pad counter-clockwise.
For the installation of the inserts in ultem, place beforehand a small transparent joint (provided) around the base of the insert (this seal ensures a good maintenance in position and a sealing for the flow of air). The ultem inserts are designed to fit snugly in their cavity, they must not protrude outside or inside the chamber.
Fiyat:120 Euro